FRP Allied Products
Glass Fiber Mat
Supplied and imported by Samrat FRP Traders for the Nepal market — with technical documentation issued by the supplier, Samrat Poly Resins, India.
Price
PRICE ON REQUEST
Glass Fiber Mat pricing varies based on:
- Order Quantity
- Product / Resin Grade
- Current Raw Material Rates
Technical documents
Download Technical Data SheetPDFDownload Safety Data SheetPDFFull product rangeBrowse the document libraryDocuments issued by: Samrat Poly Resins, India
E-glass chopped strand mat (CSM).
About this product
Glass Fiber Mat is an E-glass chopped strand mat (CSM) — a non-woven reinforcement material used to build FRP laminates, and not a resin. Samrat FRP Traders supplies and imports this material for the Nepal market. Current Samrat Poly Resins, India documentation identifies it as an industrial-grade E-glass CSM available in 300 g/m² and 450 g/m² rolls.
The mat is made from 50 mm chopped E-glass strands held together with an emulsion binder, so it stays easy to handle and wet out before the chosen resin locks the reinforcement into a cured laminate. The supplier documentation lists a 1040 mm roll width and polyester-compatible sizing, which supports clean wet-out in polyester-family resin systems.
In an FRP system the mat supplies the load-bearing reinforcement, while the resin provides the shape, surface finish and cure — the two are always selected together, not as a single product. Because the published weights and sizing describe the reinforcement itself, the finished laminate's strength and finish still depend on the resin system, fibre loading and lay-up quality.
For current pricing, availability and packaging options in Nepal, contact Samrat FRP Traders through the enquiry page, and share whether CSM 300 or CSM 450 is required together with the intended component and resin system.
What this means for buyers
Grade selection
CSM 300 and CSM 450 identify the two published area weights — 300 g/m² and 450 g/m². The heavier mat builds thickness faster, but the right choice depends on your laminate design, required reinforcement build-up and production method, so confirm against the supplier documentation rather than assuming one weight fits every part.
Resin pairing
The supplier documentation lists polyester-compatible sizing, which suits unsaturated polyester and vinyl ester resin systems. The mat is not a standalone resin; the reinforcement and resin are chosen together, and the full system should be confirmed before ordering.
Documents
A supplier-issued Technical Data Sheet and Safety Data Sheet are available for this product. For current Nepal pricing, availability and packaging options, use the enquiry page rather than relying on supplier-side commercial formats.
Key features
- E-glass chopped strand mat, 50 mm fibre length
- 300 g/m² and 450 g/m² weights available
- 1040 mm roll width, polyester-compatible sizing
- High filament-level tensile strength for laminate reinforcement
- Reliable resin wet-out for consistent laminate strength
Technical specifications
- Material
- E-glass
- Form
- Chopped Strand Mat (CSM)
- Available weights
- 300 g/m² and 450 g/m²
- Fibre length
- 50 mm
- Roll width
- 1040 mm
- Sizing
- Polyester-compatible sizing
Source: Samrat Poly Resins, India — Technical Data Sheet
Product details
Applications
Supplier documentation lists use in FRP laminate reinforcement, marine, automotive and construction composites, moulded fibreglass parts, and hand layup and spray-up reinforcement.
Resin for Water Tank ManufacturingWater tank manufacturers need a resin that wets out glass reinforcement cleanly and cures into a strong, leak-resistant laminate for long-term structural integrity.
Resin for Cooling Tower ManufacturingCooling tower components face constant moisture and temperature cycling, demanding a laminate with lasting mechanical strength and chemical resistance.
Resin for Roofing Sheet ManufacturingRoofing and cladding sheet manufacturers need even lamination across large panel areas, without pooling or dry patches that weaken the sheet.
Resin for FRP Door ManufacturingFRP doors need a laminate that bonds well to the door-skin substrate and holds its shape and strength through years of daily use.
Resin for Door Skin ManufacturingDoor skin production calls for excellent wet-out and a clean, glass-like cured finish straight out of the mould.
Resin for FRP Panel ManufacturingGeneral FRP panels — from partitions to enclosures — need a resin that processes predictably at volume, batch after batch.Industries served
- FRP & composites manufacturing
- Marine & automotive fabrication
- Construction & panel manufacturing
- General moulding & fabrication
Product comparisons
Frequently asked questions
What is Glass Fiber Mat?
It is an E-glass chopped strand mat (CSM) — a non-woven reinforcement of chopped E-glass strands used with a polyester or vinyl ester resin to form FRP composites. Samrat FRP Traders supplies and imports it for the Nepal market.
What glass type, fibre length and weights are published?
The supplier documentation identifies E-glass with a 50 mm chopped fibre length, available in 300 g/m² and 450 g/m² weights, on a 1040 mm roll width with polyester-compatible sizing.
How do I choose between CSM 300 and CSM 450?
The two grades differ in area weight. The correct option depends on the component drawing, required reinforcement build-up, resin system and production method, so share those details so the requirement can be reviewed against the Technical Data Sheet.
Which resin systems is the mat used with?
Its polyester-compatible sizing wets out cleanly with polyester-family systems such as unsaturated polyester and vinyl ester. The mat is a reinforcement, so the resin is selected separately for the finished part.
What documents and commercial details are available?
Supplier Technical Data Sheet and Safety Data Sheet documents are available. For current pricing, availability and packaging options in Nepal, contact Samrat FRP Traders through the enquiry page.
Related products
Technical resource hub