Quick facts
- Bisphenol TDS chemistry wording
- Bisphenol A & epichlorohydrin based (thermosetting)
- Bisphenol cure wording
- Room-temperature cure with amine hardener
- Separate site routes
- Clear Casting, Epoxy Art and Fiberglass Epoxy have their own product data
- Boundary
- Current Bisphenol TDS does not label the product as a conventional epoxy substitute
Use the TDS wording without over-labelling the product
The current Bisphenol Resin TDS identifies a Bisphenol A and epichlorohydrin-based thermosetting system and lists room-temperature cure with amine hardener. Those are the documented words this guide carries forward.
The document does not state that Bisphenol Resin is the same as every conventional epoxy product on the site. It also does not establish that a decorative casting, art or structural-fiberglass epoxy route is interchangeable with this product.
Separate epoxy product routes have separate documents
Samrat lists Epoxy Clear Casting Resin, Epoxy Art Resin, Fiberglass Epoxy Resin and Epoxy Hardener as separate routes. Each has its own published intended-use context and technical documentation.
A buyer should therefore state the actual finished application and product document rather than requesting an epoxy product based only on a shared chemistry word. This prevents decorative casting, art, structural fiberglass and Bisphenol requirements from being collapsed into one enquiry.
Do not turn cure terminology into operating guidance
The Bisphenol TDS identifies an amine-hardener curing method. That is a system-identification point, not a public recipe. This guide does not provide hardener amounts, mixing order, cure schedule, cure temperature or adjustment guidance.
A buyer who needs an exact system should request the current document and state the required application, documentation and commercial requirement. The website should not transfer operating instructions between separate resin routes.
Keep finished performance separate
No direct comparative mechanical table, adhesion result, chemical-compatibility chart, temperature limit or finished-component approval is published between Bisphenol Resin and the separate epoxy products. No performance hierarchy is claimed here.
Use the current product-specific TDS and project specification to define the conversation. If the project also specifies fire performance, identify that separately rather than assuming it from either Bisphenol or epoxy terminology.
Frequently asked questions
Is Bisphenol Resin the same as a conventional epoxy resin on this site?
No automatic equivalence is published. The current Bisphenol TDS uses Bisphenol A, epichlorohydrin and amine-hardener wording, but it does not label the product as interchangeable with Samrat Poly Resins, India's separate conventional epoxy product routes.
Can Epoxy Clear Casting Resin replace Bisphenol Resin?
No substitution is published. Epoxy Clear Casting Resin has its own product role and documentation. Select the exact product route for the actual finished application.
Does the Bisphenol TDS provide an amine hardener ratio?
The TDS includes a hardener reference, but this guide does not reproduce ratios, mixing instructions, cure schedules or process guidance.
Does the shared word 'Bisphenol' make this product interchangeable with every epoxy or Vinyl Ester Resin?
No. The current Bisphenol Resin TDS and each separate product route must be reviewed for the stated application. A shared chemistry word does not establish interchangeability.